GRS Graver C-Max
Preshaped to 60° but should be sharpened properly before use. This RFF has angled sides similar to a V-Point or Square graver on the cutting edge, but the top is rounded. An RFF Point can be used for deep, narrow V-cuts, stone setting techniques, and straight line engraving. This graver features two flat alignment areas on the shank for quick orientation in a QC Tool Holder. The set screws on GRS QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately. Length: 1.8″ (45.72 mm). Diameter: 0.125″ (3.175 mm). Use with QC Tool Holder for 1/8″ Round (#004-873).